Actividad 6. Frame Relay Case Study

Your task is to reconfigure the topology, using the DLCI you want, and simulating internet with a loopback interface. Verify end-to-end connectivity

Configuracion:

enable
conf t
hostname varsovia


R1(config)#interface serial0/0/0 
R1(config-if)#encapsulation frame-relay 
R1(config-if)#no shutdown


ip address 10.10.10.2 255.255.255.252
no shutdown 

R1(config)#interface serial0/0/0 
R1(config-if)#frame-relay map ip 10.10.10.1 30 broadcast

router rip version 2


varsovia(config)#router rip
varsovia(config-router)#version 2
varsovia(config-router)#network 10.10.10.2
varsovia(config-router)#network 172.16.1.0

para mostrar show ip route

R2(config)#interface serial0/0/0 
R2(config-if)#encapsulation frame-relay 
R2(config-if)#no shutdown


ip address 10.10.10.1 255.255.255.252
no shutdown 

R1(config-if)#frame-relay map ip 10.10.10.2 20 broadcast

varsovia(config)#router rip
varsovia(config-router)#version 2
varsovia(config-router)#network 10.10.10.1
varsovia(config-router)#network 192.168.1.0